Recovery ROM (.zip): Used for applying updates directly from system updater or custom recovery. Fastboot ROM (.tgz): Used for clean installation, factory reset, or unbricking via Mi Flash Tool.
Facing Bootloops, Hard-Bricks, or Power Failures on Poco?
If your device cannot enter Fastboot mode or fails to boot, verify official warranty status (eligible manufacturing defects are repaired for âš0) or locate authorized walk-in centers:
⥠How to Flash Poco Fastboot ROMs via Mi Flash Tool
Fastboot firmware packages (.tgz) contain uncompressed raw partition images (boot.img, super.img, recovery.img, cust.img). Flashing via Fastboot completely overwrites low-level partitions, restoring factory integrity and recovering soft-bricked devices.
1
Unlock Bootloader & Drivers
Ensure your Poco bootloader is unlocked via the Mi Unlock Tool. Flashing Fastboot partition images requires bootloader cryptographic permission. Install Xiaomi USB Fastboot drivers on Windows.
2
Extract .TGZ Archive Twice
Use 7-Zip or WinRAR to extract the downloaded .tgz file twice (extract .tgz to .tar, then extract .tar to folder). Move the folder to a short root directory on PC (e.g. C:\rom\) with no spaces or special characters in the path.
3
Boot into Fastboot Mode
Power off your phone completely. Press and hold Volume Down + Power simultaneously until the Fastboot logo (or orange FASTBOOT text) appears. Connect to PC using a reliable USB-A to USB-C cable (prefer USB 2.0 rear motherboard port).
4
Flash via Xiaomi Mi Flash Tool
Open Mi Flash Tool > click Select and choose the extracted folder > click Refresh to detect device ID. In the bottom bar, select "clean all" (flash_all.bat). Never select "clean all and lock" if flashing cross-region ROMs. Click Flash and wait for success.
đ Mi Flash Tool Script Breakdown (Crucial Decision)
RECOMMENDED
clean all (flash_all.bat)
Completely wipes internal storage, formats user data, and flashes all partitions clean. Essential for fixing bootloops, removing malware, or upgrading major Android versions.
RETAIN DATA
save user data (flash_all_except_storage.bat)
Flashes system partitions while preserving user media. Only recommended when updating within the same regional branch and minor version.
DANGER: LOCKS BOOTLOADER
clean all and lock (flash_all_lock.bat)
Flashes full ROM and locks the bootloader. NEVER use on cross-region firmware (e.g. flashing Global ROM on China hardware) or the device will hard-brick.
â ī¸
CRITICAL ANTI-BRICK WARNING FOR POCO HARDWARE: Never select "clean all and lock" if you are flashing a Global or European ROM on a device manufactured for the China market. Locking the bootloader with non-matching region software causes a fatal security lockout: The system has been destroyed. Always choose "clean all".
đ§ Fastboot Technical Troubleshooting Matrix
Engineering resolutions for common Fastboot connection dropouts, protocol timeouts, and flashing script failures.
Error / Symptom
Root Cause
Technical Resolution
Mi Flash freezes / hangs on USB 3.0 / AMD Ryzen
Incompatible xHCI USB controller handshakes between AMD AM4/AM5 chipsets and fastboot transfer protocols.
Connect the device to a USB 2.0 port (black port on rear motherboard I/O panel) or route through an unpowered USB 2.0 hub. Alternatively, run fastboot commands via command line with fastboot -u.
error: Missmatching image and device
Firmware codename in flash_all.bat header line does not match the device hardware codename.
Run fastboot getvar product in command line to verify device codename. Ensure downloaded package codename matches your device hardware.
flash system_a error / cannot write to super
Attempting to flash dynamic super partitions with outdated fastboot binaries or locked bootloader.
Update to Xiaomi Mi Flash Tool v20200314 or newer which includes support for virtual A/B super partition resizing. Verify bootloader is unlocked via fastboot getvar unlocked.
Press any key to shutdown bootloop
Corrupted boot header, incompatible kernel image, or incomplete super partition write.
Re-flash stock recovery image via fastboot flash recovery recovery.img or execute a complete clean flash via flash_all.bat.
Device drops into Emergency Download (EDL 9008) mode
Anti-Rollback violation, locked cross-region bootloader, or corrupted primary partition table.
Device displays black screen and registers as Qualcomm HS-USB QDLoader 9008 in Device Manager. Unbricking requires authorized service flashing. Check your device on the Poco Warranty Check portal and visit an authorized service center for EDL unbricking.
⥠POCO Fastboot Flashing & Hardware Triage
When restoring POCO smartphones (F, X, M series) from custom AOSP ROMs back to stock OEM software, flashing the Fastboot ROM via flash_all.bat is mandatory to recreate stock vendor, dtbo, and super dynamic partitions. On older models experiencing sudden power-offs (e.g. Poco X3 Pro / M3), verify whether the device enters Fastboot mode: if unrecognized via USB, the issue is hardware PMIC solder fatigue rather than software. In such cases, check your coverage via the POCO Warranty Check portal (extended warranties apply to specific batches) or inspect out-of-warranty motherboard rates on the POCO spare parts price guide before scheduling an appointment at an authorized POCO service center.
Frequently Asked Questions (Poco Fastboot)
Does flashing a Poco Fastboot ROM require an unlocked bootloader?
Yes, absolutely. Fastboot flashing writes raw image files directly to physical partitions, which requires bootloader authorization. Attempting to flash Fastboot images on a locked bootloader will result in FAILED (remote: Device is locked. Cannot flash images).
Will flashing a Fastboot ROM erase my personal files and apps on Poco?
If you select 'clean all' (flash_all.bat), yes â all internal storage, installed apps, and user accounts are formatted. If you select 'save user data', personal files in internal storage are preserved, although a clean flash is recommended for major upgrades or unbricking.
How do I fix 'error: Missmatching image and device' in Mi Flash Tool?
This occurs when the downloaded Fastboot package codename differs from your phone's hardware codename. Open command prompt in your platform-tools folder and run fastboot getvar product. Redownload the Fastboot package specifically matching that returned codename.
Can I flash a Global Fastboot ROM on a China-hardware Poco phone?
Yes, provided your bootloader is unlocked. However, you MUST select 'clean all'. Never select 'clean all and lock', as relocking the bootloader on cross-region hardware will brick the device with The system has been destroyed.
Why does Mi Flash Tool fail to detect my Poco device in Fastboot mode?
Ensure Xiaomi Fastboot drivers are installed. If Device Manager displays a yellow exclamation mark under Other Devices (Android), manually update driver to 'Android Bootloader Interface'. On AMD Ryzen motherboards, switch to a USB 2.0 port to prevent handshake dropouts.
Are Fastboot packages on this directory original untouched OEM releases?
Yes, 100%. All Fastboot (.tgz) packages indexed here are genuine, unmodified OEM vendor builds sourced directly from vendor update servers, complete with SHA-256 cryptographic checksums.
Does flashing official stock Fastboot firmware void my Poco warranty in India?
No. Installing official, untouched stock Fastboot ROMs (.tgz) or recovering your device via Mi Flash Tool does not void your hardware warranty in India. If your device experiences a hardware malfunction or motherboard failure, verify your active coverage on our Poco Warranty Check portal and visit an authorized service center for free in-warranty repair.
Third-Party Disclaimer: This website is an independent download directory and archive. We are not affiliated, associated, authorized, endorsed by, or in any way connected with Xiaomi Inc., Redmi, POCO, or any of their subsidiaries. All product names, logos, brands, and trademarks are property of their respective owners.